Ghost – Eye Wireless HDMI & SDI Video Transmission Pro Kit 300M V2
Original price was: $4,829.00.$3,900.00Current price is: $3,900.00.
New Pro Kits give you savings on the products you need.
- Wireless HD video transmission kit, SDI and HDMI up to 1080p 60fps 1-bit 4:2:2
- Broadcast video and audio up to 700 meters/2297 feet (line of sight) over 5GHz frequencies
- Time Code supported
- Transmit to up to 4 receivers (of any Ghost-Eye model) on separate channels with <30ms latency
- 1-year warranty serviced in North America
Out of stock
Highlights:
- Cloverleaf antennas which offer increased range
- Includes rugged Pelican Protector case to protect your kit
- Wireless HD video transmission kit, SDI and HDMI up to 1080p 60fps 10-bit 4:2:2.
- Broadcast video and audio up to 700 meters/2297 feet (line of sight) over 5GHz frequencies.
- Time Code supported.
- Transmit to up to 4 receivers (of any Ghost-Eye model) on separate channels with <1ms latency.
- Increased range
- 1-year warranty serviced in North America.
Main Features of Cinegears Ghost-Eye 300m Video Transmission Suite
- 5GHz ISM Band wireless HD video transmission > 300m (980ft) depending on line of sight.
- HDMI and SD/HD/3G SDI input and output.
- Supports up to 3D 1080p/60Hz resolution, HDMI/HD-SD/3G-SDI 4:2:2, 10bits color depth.
- Signal status indicators for power, video, and receiver RSSI.
- AES-128/256 encryption with air interface HD video data stream.
- Supports multiple channel switching and broadcast mode for 1 transmitter to multiple receivers.
- HDMI 1.3 with EDID support.
- Supports Timecode, LUT, start/stop sync.
- Uncompromised picture quality with very low latency <1ms.
- Wide range power voltage input, suitable for most kinds of camera batteries.
- Plug & Play- full hardware design, no software is required.
- Standard V-mount, Variety mount, or 1/4″ bolt.
- Any input and output ports with ±8 kV ESD protection level (HBM, contact discharge).
Overview
Cinegears Ghost-Eye wireless video transmission systems are already on thousands of film sets around the globe. With all the cutting edge features packed into the compact transmitters and receivers, the choice is clear: keep watch over your shot with Ghost-Eye. The Ghost-Eye M-series provides the best solution for video and audio transmission for film and television making professionals on set and in post-production.
No compromise for quality; your video and audio signals get sent at industry-leading speeds from A to B (or from A to B, C, D, and E with built-in point-to-multipoint topology) with zero compression. Your signal will arrive in all its 10-bit, 4:2:2, 1080p, 60fps glory; don’t miss a single frame! Broadcast from virtually any SDI or HDMI output you can find, and have your signal received by up to 4 Ghost-Eye receivers of any model!
With a 1-year warranty* and firmware upgrade guarantee, your Ghost-Eye units will always function at peak performance. We are here to help; we can troubleshoot over the phone or by email, and with the product designer in-house we always have the answer!
Ghost-Eye 300M Wireless Video Transmission kit
Avoid the clutter and headache of cables with the Cinegears Ghost-Eye 300M Wireless Video Transmission System; one Ghost-Eye Wireless Video Transmitter 300M, and one Ghost-Eye Wireless Video Receiver 300M. With up to 300m of high fidelity, uncompressed HD video transmission, feel free as you shoot indoors or out, night or day.
With both 3G and HDMI inputs and outputs, using frequencies between 5.1-5.9GHz as needed (up to 4 simultaneously), you will utilize the current cutting edge of video transmission, adding a professional quality to your project.
The Cinegears Wireless HD/SDI HD Video Transmission system is an affordable and effective solution, requiring no technical skills and virtually no learning curve to operate. We focus on creating technologies that include the most effective, reliable, and affordable solutions. With our simple and elegant design, Cinegears makes sure you’re Always in Focus.
300M Wireless HD Video Transmitter
- INPUT: SDI/HDMI input from digital Cinema cameras, HD SDI video cameras and other Digital devices
- 5 External paddle antennae with RPSMA socket
With the Cinegears Ghost-Eye Wireless HDMI & SDI Transmitter 300M, transmit high fidelity, uncompressed HD video up to 700 meters/2297 feet, and feel free as you shoot indoors or out, night or day. With both 3G and HDMI inputs and outputs, using frequencies between 5.1-5.9GHz as needed (up to 4 simultaneously), you will utilize the current cutting edge of video transmission, adding a professional quality to your project. Pair this transmitter with any Ghost-Eye receiver.
300M Wireless HD Video Receiver
- OUTPUT: SDI/HDMI, dual output supported
- 2 External paddle antennae with RPSMA socket
With the Cinegears Ghost-Eye Wireless HDMI & SDI Receiver 300M, receive high fidelity, uncompressed HD video up to 700 meters/2297 feet, and feel free as you shoot indoors or out, night or day. With both 3G and HDMI inputs and outputs, using frequencies between 5.1-5.9GHz as needed (up to 4 simultaneously), you will utilize the current cutting edge of video transmission, adding a professional quality to your project. Pair this receiver with any Ghost-Eye transmitter.
Installation Details and Cautions
Transmitter Side
a) Install 2 Omni-directional and high efficiencyantennas to Transmitter’s SMA male antenna connectors.
b) There are 3 1/4-20 screw nuts in transmitter metal case, which are located on surface, rear and bottom. So the user can utilize a 1/4 screw to ISO518 hot-shoe converter fix the transmitter on camera.
c)Install Battery into battery buckle if your product model includes battery buckle option; please note the battery model must match the battery buckle type.
d) The user can also utilize a subsidiary LEMO 4 pinmale toD-Type receptacle power cable to get power input from an outside power source.
e) All TX installation guidelines see below figure.
Receiver Side
a) Install 5 pcsOmni-directional and high efficiency antennas to receiver’s SMA male antenna connectors.
b) There are a 1/4-20 screw nut in the surface side of receiver. The user can utilize a 1/4 screw fix the subsidiary metal hook with the receiver.
c) Install Battery into battery buckle if your product model includes the optionof battery buckles; please note the battery model must match the battery buckle type.
d) The user can also utilize a subsidiary LEMO 4 pin-male toD-Type receptacle power cable to get power input from an outside power source.
e) All RX installation guidelines see below figure.
Specifications
Transmitter | Receiver | |
Interface | SDI Input(BNC Female); HDMI Input(Type A female); 2 Antenna port(PR-SMA male); DC input(4 pin LEMO female) | SDI Output(BNC Female); HDMI Output(Type A female); 5 Antenna port(RP-SMA male); DC input(4 pin LEMO female) |
Supply Voltage Range | 6.5-16.8V DC | 6.5-16.8V DC |
Transmission Distance | up to 700m/2296 ft | up to 700m/2296 ft |
Power Consumption | <6.5W | <6W |
Size | (L x W x H):120 x 70 x 25mm (does not include antennas) | (L x W x H): 160 x 110 x 25mm |
Mass Weight | 380g | 540g |
Input Video Format | SDI:3G,HD SD-SDI(Auto/Manuel-Selected): 525i, 625i, 720p 50/59.94/60, 1080i 50/59.94/60, 1080p23.98/24/25/29.9/30/50/59.94/60;HDMI Type A: 525i, 625i, 720p 50/59.94/60, 1080i 50/59.94/60, 1080p23.98/24/25/29.9/30/50/59.94/60;SMPTE 259/274/292/296/372/424/425; | SDI:3G,HD SD-SDI(Auto/Manuel-Selected): 525i, 625i, 720p 50/59.94/60, 1080i 50/59.94/60, 1080p23.98/24/25/29.9/30/50/59.94/60;HDMI Type A: 525i, 625i, 720p 50/59.94/60, 1080i 50/59.94/60,1080p23.98/24/25/29.9/30/50/59.94/60;SMPTE 259/274/292/296/372/424/425; |
Output Video Format | / | SDI:3G,HD SD-SDI(Auto/Manuel-Selected): 525i, 625i, 720p 50/59.94/60, 1080i 50/59.94/60, 1080p23.98/24/25/29.9/30/50/59.94/60;HDMI Type A: 525i, 625i, 720p 50/59.94/60, 1080i 50/59.94/60,1080p23.98/24/25/29.9/30/50/59.94/60;SMPTE 259/274/292/296/372/424/425; |
Video Processing Color Depth | 8bit;10 bit;(4:0:0);(4:2:2);(4:4:4) | 8bit;10 bit;(4:0:0);(4:2:2);(4:4:4) |
Input Audio Format | SDI embedded 4 channel 24 bit/48Khz | / |
Output Audio | / | SDI embedded 4 channel 24 bit/48Khz |
Signal Indicator | POWER-Green; VIDEO-Yellow | POWER-Green; Wireless RSSI-Blue(4 LEDs); POWER/VIDEO-Yellow |
Frequency Band | 5.1-5.9GHz,configurable with China, North American, Europe, etc | 5.1-5.9GHz,configurable with China, North American, Europe, etc |
Modulation Mode | OFDM 16QAM | OFDM 16QAM |
Transmission Power | < 21dBm | / |
Receiver Sensitivity | / | -75dBm |
Occupied Bandwidth | 20/40MHz | 20/40MHz |
Temperature Range | 0-40oC(operating condition);-20-60oC(Storage) | 0-40oC(operating condition);-20-60oC(Storage) |
Transmission Cross Capability | Ghost-Eye 100M;150M;300M;400M | Ghost-Eye 100M;150M;300M;400M |
Time Code | Ever 10 Second | Ever 10 Second |
Compliance | FCC; CE; RoHS | FCC; CE; RoHS |
In The Box
1 x Wireless HDMI Video Transmitter 300M
1 x Wireless HDMI Video Receiver 300M
7 x Paddle Antennas
1 x Pannel Antenna
7 x 5G optimized cloverleaf antennas
1 x Cinegears Heavy Duty Steel Ball Joint Articulated Arm
1 x Cinegears Steel Mounting Clamp 12mm-55mm
2 x 4-Pin Lemo Power Cable for 300M System
1 x Waterproof Pelican Case for CINEGEARS 300M